Quick and Easy Nine-Patch Quilt Blocks

The Quick and Easy Nine Patch Block…

After several weeks, I finally got around to a little bit of sewing and I decided to try out a YouTube tute on an easy and quick method for a nine-patch block, which I had seen long, long ago!  In fact, almost five years ago, I had adapted this method to test and write one of my most popular tutorials, the one on how to sew an easy and perfect four-patch. So without much ado, here we go on my adaptation of the same tute to make several nine-patch blocks in a batch!

I will do this tute in two parts. In the first I will show you how I made several nine-patch blocks in one go.  In the second part I will give you Maths for various sizes and some tips, including those for perfectly matched points on your blocks.

The Method

For my project, I need several nine-patch blocks of 0.75″. Yes, you read that right, 3/4″ blocks! Almost impossible to manage by the regular methods, one would think, since each of the nine square patches would be 3/4″ to start with, and end at 1/4″!

1. I begin with 2 strips of 2.5″ width in the fabrics I will be using for my block. Actually 2.25″ would have been sufficient, but remember a good rule to follow when working with miniature blocks is wherever possible,  sew bigger and then trim to size.  I will discuss the length of the strips later.

Begin with 2 strips 2.5″ wide

2. I sew a scant 1/4″ seam on both long edges.

Sew 1/4″ seam on both long edges

3. Now  I do something one doesn’t usually do! I trim the seams by about 1/16″ or 4-5 threads. Remember the final size of the pieces is only 1/4″? Unless I trim the seams, things are going to get difficult and messy at the back!

Trim the seams by about 1/16″

4. Measuring from just inside the seam, I make a long cut 1/2″ inside on the joined strips. ( 1/4″ is the size of the final patch, plus 1/4″ for the seam. ) Similarly inside the other seam.

Cut 1/2″ inside both the seam lines…Note the placement of the ruler. The 1/2″ mark is just inside of the seam line.

5. I now have this:

Two pink-white strips and  one each of pink and white strips about 1″ wide.

One pink strip, one white strip and two joined pink-white strips

6. I press open the two pink-white strips…

Important: Do not iron open the seams. Instead, press them to one side. I ironed them to the darker, pink side.

Press the seams on both strips to one side, towards the same colour. I chose to press mine to the pink.

7. I now sew the pink strip and the white strip to these, to get one pink-white-pink and the other white-pink-white strips and press it open, seams are again pressed to the darker ( pink) side.

Iron open the pink-white strips. Do not press open the seams; instead, press the seam to one side. Again, be consistent. I press the seams to the pink as I did on the previous stage.

8. Measuring from just beyond the seam, I trim the newly added pink strip to 1/2″. Had I worked with 2.25″ strips, this would not have not been required, as my recently added strip would have been 3/4″ instead of 1″.

Trim newly added strip to 1/2″ width.

9. And similarly, the white strip.  The final white-pink-white strip will be just the scantiest bit wider than 1.25″, as will be the pink-white-pink strip.

Trim white strip to 1/2″ width from just beyond seam.

10. I now cut 2.5″ long pieces from the lengths of the two strips.

Cut 2.5″ long pieces from the strips…

I had begun with 10″ long strips, so I have 4 pairs of 2.5″ long strips at the end of this stage. ( I now made another 5 sets of these readied strip pairs, using 12.5″ strips, so don’t let the coming pictures confuse you!)

11. Now comes the most exciting part, where the magic starts to reveal! I pick up each pair, right sides together, and sew 1/4″ seams along the shorter edges. I had pressed the seams towards one colour; this ensures that the seams ‘lock’ and my points match beautifully. 

Pair the pink-white-pink strip with the the white-pink-white strip and sew 1/4″ seams along the shorter edges.

Remember, chain stitching makes things move really fast!

12. You may have guessed what comes next? A cut 1/2″ from inside both seams. I could, of course, measure 3/4″ from the edge. But measuring from the seamline ensures accuracy of my ready size, because it takes into account that my 1/4″ seam may be a tad more or less than 1/4″!

13. Have we forgotten something here? Yes. We had to trim the seam (allowance) by 1/16″.

Cut 1/2″ within seam. Can you see that my seam is uneven? Measuring from the seam ensures my final strip will be accurate and the correct width!

14.  Press open the (6-patch) side pieces; again, seam to one side – do not press seam open.  Which side? I pressed half of them on one side and the remaining nine on the other and made two separate piles of these 6-patches. I realised later this could get a little complicated with regular sized blocks! How?  I will try to answer this later in the “Tips” section.
I joined the centre strips to side pieces appropriately. the white-pink-white to one pile and the pink-whie pink to the other.

Almost there!

15. Once sewn, I first press the seams towards the edge and am ready for the last step …

18 nine-patches in no time at all! All pressed. Just one more step…

16. …the last strip joined has to be trimmed to 3/4″.

Trim to 1/2″ from the seam. This is a good time to check all edges and trim them as necessary to get an accurate 1.25″ square.

Here we are, the final eighteen!

Nine blocks have white squares in the corners and centre. The other nine are reversed.

The Maths

Width of Strips

The Maths is very simple. Just add 1.5″ (for 6 seam allowances of 1/4″ each) to the size of your ready nine-patch, to get the width of your strips. So if you want a 6″ patch, begin with 7.5″ strips, if you want a 3″ strip, start with  4.5″  wide strips.

Length of Strips

This will depend on the number of blocks you need.  The minimum nine-patches you can make by this method is two, one the colour reversal of the other.

If you need just two blocks, begin with 2 squares. The size of the square? Easy! Size of ready nine-patch plus 1.5″ . So for a pair of  6″ nine-patches, you need two squares of 7.5″. And, if you need a pair of nine-patches of 3″, start with two 4.5″ squares.

If you have a set of 5″ charm squares lying around and are wondering what to do with them, it may be a great idea to pair up contrasting colours and make  3″ nine-patches with them.  The strips will have to be cut at 1.25″ from the seam at Stage4 and the centre strip will require trimming as it will be 2″ wide.

Add one width to the length,  for each extra pair that you require.  For two pairs of 6″ squares, the two strips will be 7.5″ x 15″. For 3 pairs, 7.5″ x 22.5″, for 4 pairs 7.5″ x 30″ and so on…

Tips 

  1. Caution: This method gives you two sets of nine-patches, which are colour reversals of each other. It will not work if you want identical nine-patches. Of course, you could put away the unwanted 9-patches for another project or use them in a border or something. If doing miniature blocks like I am making, I recommend this method every time. You can always use up the extra blocks.
  2. I am repeating myself: press the seams to one side, consistently. Like  I said, things get complicated when we reach the last stage of assembling the nine patch.

a) If making mini-blocks, press towards the strip which will be on the edge. Thus if you are making a block with 5 pink patches and 4 white ones, press towards the strip which has pink-white-pink patches. And vice versa with the colour reversal patch. In other words, half of them to one side and the other half to the other, like I did. Your finished nine-patches will look like this from the back. The last two seams face the edges.

The two patches from the back…

b) If making regular sized blocks, which will be attached to other nine-patch blocks to make perhaps a border or larger units, I would follow the traditional method. Press seams on the blocks in one direction consistently, towards the pink-white-pink strip. In half of these blocks ( 5W-4P) the two last seams will end up facing each other towards the centre, in the other half  (5P-4W) towards the edge. Then when these nine-patches are being joined together, seams will lock in to give you perfectly matched points.

c) If making regular-sized blocks which will not be attached to other nine patches,  press seam towards edge like in a) above.

Well, I really can’t think of anything else, so…

Are you wondering what I am going to do with all these miniature 9-patches? What is coming up next? Well, you’ll just have to wait and watch, won’t you?

I sign off wishing all my friends across the world a Very Happy Diwali, the Hindu Festival of Lights! May our Earth see the victory of prosperity over want, of peace over war, of good over evil,  of health over disease, of hope over despair, of love and compassion over hatred…of light over darkness, everywhere and for all its inhabitants.

 


Advertisements

4 thoughts on “Quick and Easy Nine-Patch Quilt Blocks

  1. Wow! Thank you so much for the mini 9 patch tute. This is so eye-opening. Great method to attack small piecing. Just love your work. Thanks for sharing.

    • Thank you and you are welcome! I loved the fact that I could make so many patches within no time at all and they are absolutely perfect, with points matched to a thread. 😍

  2. This is a great method. I only wish I had explored your blog sooner as I just finished a quilt top with numerous mini-9-patches. Can’t wait to try this the next time it comes up, or sooner. Having a stash of mini-9-patches around could be fun; especially if they look as nice as yours.

    • Thank you – I am glad you found it useful! Do share pics of your 9-patches on my Facebook page, if you do get around to using this method! I cannot even begin to imagine making 3/4” 9-patches by regular piecing! 😳

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s